The decoration waste sorting and processing equipment production line includes crushers (bag breakers), drum screens, vibrating screens, pop-up screens, transmission screens, belt conveyors, air separators, magnetic separators, etc., which can be combined as needed.

Crusher:

Municipal domestic waste is often packaged in plastic bags, with small bags in large bags. If the garbage is not scattered from the bags, it will not be possible to effectively separate them later. Therefore, the garbage bags in the first link of the front end need to be broken/torn, and bag breakers or crushers are generally used. Both can tear the garbage bags open and disperse the garbage for subsequent sorting. The difference between the two is that the bag breakers are usually only used to tear open the garbage bags, not to separate the garbage in the crushed bags into multiple individuals and fragments. Dispersing waste can avoid serious entanglement, contamination and adhesion, and scattering waste can avoid serious entanglement, contamination and adhesion. The crusher can not only tear open the garbage bags, but also tear the garbage into multiple individuals and fragments, so as to separate the garbage more effectively without adhesion, entanglement and contamination.

Drum screen:

Also called drum screen, it is a slowly rotating cylindrical screening surface. The inclination angle of the drum screen shaft is generally set to 3~5 degrees. The material is input slightly higher during screening. As the drum turns over in the screen, fine particles eventually pass through the screen through the screen hole surface. The angle of the drum screen determines the axial speed of the material, while the behavior of the material perpendicular to the drum axis depends on the rotation speed.

It is usually used for screening of domestic waste, decoration and construction waste, etc. The size of the screen hole can be flexibly set according to actual needs. The drum screen technology is mature, and it can perform good screening operations on waste of different particle sizes, with high production capacity.

Bouncing screen:

Elastic screening classifies materials according to their weight, density, three-dimensional and plane shape. Materials can be divided into 2-3 categories through elastic screening. One type of materials is three-dimensional and heavy, such as plastic bottles, stones, ceramics, wood, and metal cans; one type of materials is flat and light, such as plastic film, fabric, paper, cartons, fiber products, etc. Screen holes can be added on the screen plate as required to separate materials smaller than a certain size. Elastic screening can also shake off sticky objects and sand stuck on the materials to disperse the materials.

Falling screen: This screening machine uses a polyurethane screen chassis. The polyurethane screen pavement is tightened and loosened to form a trampoline shape. Two vibration motors drive the movement. Using this elastic screen, the screening required for wet or sticky materials can be solved.

The dual vibration motors produce resonance and move the material in two ways. The first is the tightening and loosening of the polyurethane gasket. The second is the transmission material. Due to the tightening and loosening of the screen chassis, there will be no blind spots or nailing to avoid blockage. The high acceleration of the material makes it possible to separate difficult materials. The screener can have a multi-layer design and a combination of standard screeners.

Advantages of choosing our garbage sorting equipment:

1. The scheme design is implemented as a general package, which saves effort and worry.

The selection of the production line, equipment configuration, on-site setting, trial operation, etc. are determined from the on-site investigation. The whole process is tracked and undertaken by the company's experts. The user's investment and engineering construction are quite clear. The user only needs to wait until the start-up period to start operation, and the whole process is labor-saving.

2. Mature technology and reliable equipment

The production line plan is designed according to local conditions. The layout of the entire production line is compact, reasonable and smooth, and the quality of all equipment is guaranteed. The equipment of the entire production line is at a high-tech level to ensure that the production line maintains efficient and stable operation for a long time.

3. Green and environmentally friendly, energy-saving and power-saving

The design level of the garbage sorting equipment production line of the factory meets the requirements of domestic environmental impact assessment. The noise and dust pollution of the entire production line are reasonably controlled, which does not affect the surrounding environment, improves the economic benefits of the enterprise, and also takes into account social benefits.